The SSGS Ground Shaft Pinions are Spur Gears made from carbon steel, are induction hardened, and the teeth are ground finished. The shaft ends are not hardened specifically to allow modification of shafts to fit your bearings
Unit of Measure
Specifications
Gear Type |
N/A Spur Gears |
Construction |
N/A Ground Spur Pinion Shafts |
Module |
N/A 3 |
No. of Teeth |
N/A 11 |
Profile Shift Coefficient |
N/A +0.5 |
Shape |
N/A S7 |
Bending Strength |
N/A 96.6 N·m9.85 kgf·m |
Surface Durability |
N/A 31.9 N·m3.26 kgf·m |
Backlash |
N/A 0.0043-0.0083 in0.11-0.21 mm |
Precision Grade |
N/A JIS grade N7 (JIS B1702-1:1998) |
Gear Teeth Type |
N/A Standard Full Depth |
Pressure Angle |
N/A 20 º |
Material |
N/A S45C (AISI 1045) Carbon Steel |
Surface Treatment |
N/A Black oxide coated except for ground part |
Heat Treatment |
N/A Thermal refined, gear teeth induction hardened |
Tooth Hardness |
N/A HRC 50-60 |
Weight |
N/A 1.11 kg2.447 lb |
Dimensions
Shaft Diameter Left (A') |
N/A 1.071 in27.2 mm |
Shaft Diameter Right (A) |
N/A 1.071 in27.2 mm |
Pitch Diameter (C) |
N/A 1.299 in33 mm |
Outer Diameter (D) |
N/A 1.642 in41.7 mm |
Face Width (E) |
N/A 1.181 in30 mm |
Shaft Length Left (F') |
N/A 1.575 in40 mm |
Shaft Length Right (F) |
N/A 5.906 in150 mm |
Total Length (G) |
N/A 8.661 in220 mm |
