The SSGS Ground Shaft Pinions are Spur Gears made from carbon steel, are induction hardened, and the teeth are ground finished. The shaft ends are not hardened specifically to allow modification of shafts to fit your bearings
Unit of Measure
Specifications
Gear Type |
N/A Spur Gears |
Construction |
N/A Ground Spur Pinion Shafts |
Module |
N/A 2.5 |
No. of Teeth |
N/A 13 |
Profile Shift Coefficient |
N/A 0 |
Shape |
N/A S7 |
Bending Strength |
N/A 46.6 N·m4.75 kgf·m |
Surface Durability |
N/A 21.9 N·m2.23 kgf·m |
Backlash |
N/A 0.0043-0.0083 in0.11-0.21 mm |
Precision Grade |
N/A JIS grade N7 (JIS B1702-1:1998) |
Gear Teeth Type |
N/A Standard Full Depth |
Pressure Angle |
N/A 20 º |
Material |
N/A S45C (AISI 1045) Carbon Steel |
Surface Treatment |
N/A Black oxide coated except for ground part |
Heat Treatment |
N/A Thermal refined, gear teeth induction hardened |
Tooth Hardness |
N/A HRC 50-60 |
Weight |
N/A 0.83 kg1.830 lb |
Dimensions
Shaft Diameter Left (A') |
N/A 0.992 in25.2 mm |
Shaft Diameter Right (A) |
N/A 0.992 in25.2 mm |
Pitch Diameter (C) |
N/A 1.280 in32.5 mm |
Outer Diameter (D) |
N/A 1.476 in37.5 mm |
Face Width (E) |
N/A 0.984 in25 mm |
Shaft Length Left (F') |
N/A 1.378 in35 mm |
Shaft Length Right (F) |
N/A 5.315 in135 mm |
Total Length (G) |
N/A 7.677 in195 mm |
