| Items |
 /ImgCustom/1002/placeholder_notavailable.gif SMSG1.5-20L KHK SMSG1.5-20L, Module 1.5, 20 Tooth, Left Hand, Ground Carbon Steel Spiral Miter Gears |
/ImgCustom/1002/placeholder_notavailable.gif SMSG1.5-20LJ10 KHK SMSG1.5-20LJ10, Module 1.5, 20 Tooth, Left Hand, Ground Carbon Steel Spiral Miter Gears |
/ImgCustom/1002/placeholder_notavailable.gif SMSG1.5-20LJ8 KHK SMSG1.5-20LJ8, Module 1.5, 20 Tooth, Left Hand, Ground Carbon Steel Spiral Miter Gears |
/ImgCustom/1002/placeholder_notavailable.gif SMSG1.5-20R KHK SMSG1.5-20R, Module 1.5, 20 Tooth, Right Hand, Ground Carbon Steel Spiral Miter Gears |
/ImgCustom/1002/placeholder_notavailable.gif SMSG1.5-20RJ10 KHK SMSG1.5-20RJ10, Module 1.5, 20 Tooth, Right Hand, Ground Carbon Steel Spiral Miter Gears |
|||||
| Gear Type | Miter Gears | |||||||||
| Construction | Ground Carbon Steel Spiral Miter Gears | |||||||||
| Bore Type | Ground | Finished | Finished | Ground | Finished | |||||
| Module | 1.5 | |||||||||
| No. of Teeth | 20 | |||||||||
| Direction of Spiral | Left Hand | Left Hand | Left Hand | Right Hand | Right Hand | |||||
| Shape | B3 | B3K | B3T | B3 | B3K | |||||
| Bore (A) | 0.315 in8 mm | 0.394 in10 mm | 0.315 in8 mm | 0.315 in8 mm | 0.394 in10 mm | |||||
| Hub Diameter (B) | 1.024 in26 mm | |||||||||
| Pitch Diameter (C) | 1.181 in30 mm | |||||||||
| Outer Diameter (D) | 1.250 in31.74 mm | |||||||||
| Mounting Distance (E) | 1.181 in30 mm | |||||||||
| Total Length (F) | 0.834 in21.18 mm | |||||||||
| Hub Width (H) | 0.512 in13 mm | |||||||||
| Length Of Bore (I) | 0.748 in19 mm | |||||||||
| Face Width (J) | 0.315 in8 mm | 0.394 in8 mm | 0.315 in8 mm | 0.315 in8 mm | 0.394 in8 mm | |||||
| Holding Surface Diameter (K) | 0.605 in15.37 mm | |||||||||
| Set Screw Offset (L) | 0.256 in6.5 mm | 0.256 in6.5 mm | 0.256 in6.5 mm | |||||||
| Set Screw Size | M4 | M5 | M4 | |||||||
| Keyway (W x D) | 0.157 x 0.071 in4 x 1.8 mm | 0.157 x 0.071 in4 x 1.8 mm | ||||||||
| Length from Crown to Back | 0.625 in15.87 mm | |||||||||
| Pressure Angle | 20 º | |||||||||
| Gear Ratio | 1 | |||||||||
| Helix Angle | 35 º | |||||||||
| Precision Grade | JIS B 1704:1978 grade 2 | |||||||||
| Gear Teeth Type | Gleason | |||||||||
| Heat Treatment | Teeth Induction hardened | |||||||||
| Bending Strength | 4.1 N·m0.42 kgf·m | |||||||||
| Surface Durability | 3.47 N·m0.35 kgf·m | |||||||||
| Backlash | 0.0016-0.0039 in0.04-0.10 mm | |||||||||
| Material | S45C (AISI 1045) Carbon Steel | |||||||||
| Tooth Hardness | HRC 50-60 | |||||||||
| Weight | 0.074 kg0.163 lb | 0.068 kg0.150 lb | 0.073 kg0.161 lb | 0.074 kg0.163 lb | 0.068 kg0.150 lb | |||||
|
|
||||||||||
