| Items |
 /ImgCustom/1002/placeholder_notavailable.gif MMSG2.5-20L KHK MMSG2.5-20L, Module 2.5, 20 Tooth, Left Hand, Ground Alloy Steel Spiral Miter Gears |
/ImgCustom/1002/placeholder_notavailable.gif MMSG2.5-20LJ14 KHK MMSG2.5-20LJ14, Module 2.5, 20 Tooth, Left Hand, Ground Alloy Steel Spiral Miter Gears |
/ImgCustom/1002/placeholder_notavailable.gif MMSG2.5-20LJ15 KHK MMSG2.5-20LJ15, Module 2.5, 20 Tooth, Left Hand, Ground Alloy Steel Spiral Miter Gears |
/ImgCustom/1002/placeholder_notavailable.gif MMSG2.5-20LJ16 KHK MMSG2.5-20LJ16, Module 2.5, 20 Tooth, Left Hand, Ground Alloy Steel Spiral Miter Gears |
/ImgCustom/1002/placeholder_notavailable.gif MMSG2.5-20LJ17 KHK MMSG2.5-20LJ17, Module 2.5, 20 Tooth, Left Hand, Ground Alloy Steel Spiral Miter Gears |
|||||
| Gear Type | Miter Gears | |||||||||
| Construction | Ground Alloy Steel Spiral Miter Gears | |||||||||
| Bore Type | Ground | Finished | Finished | Finished | Finished | |||||
| Gear Ratio | 1 | |||||||||
| Module | 2.5 | |||||||||
| No. of Teeth | 20 | |||||||||
| Direction of Spiral | Left Hand | |||||||||
| Shape | B3 | B3K | B3K | B3K | B3K | |||||
| Bore (A) | 0.551 in14 mm | 0.551 in14 mm | 0.591 in15 mm | 0.630 in16 mm | 0.669 in17 mm | |||||
| Hub Diameter (B) | 1.654 in42 mm | |||||||||
| Pitch Diameter (C) | 1.969 in50 mm | |||||||||
| Outer Diameter (D) | 2.094 in53.2 mm | |||||||||
| Mounting Distance (E) | 1.772 in45 mm | |||||||||
| Total Length (F) | 1.127 in28.63 mm | |||||||||
| Hub Width (H) | 0.630 in16 mm | |||||||||
| Length Of Bore (I) | 1.024 in26 mm | |||||||||
| Face Width (J) | 0.551 in11 mm | 0.551 in11 mm | 0.591 in11 mm | 0.630 in11 mm | 0.669 in11 mm | |||||
| Holding Surface Diameter (K) | 1.216 in30.89 mm | |||||||||
| Set Screw Size | M4 | M4 | M4 | M4 | ||||||
| Set Screw Offset (L) | 0.315 in8 mm | 0.315 in8 mm | 0.315 in8 mm | 0.315 in8 mm | ||||||
| Keyway (W x D) | 0.197 x 0.091 in5 x 2.3 mm | 0.197 x 0.091 in5 x 2.3 mm | 0.197 x 0.091 in5 x 2.3 mm | 0.197 x 0.091 in5 x 2.3 mm | ||||||
| Pressure Angle | 20 º | |||||||||
| Length from Crown to Back | 0.850 in21.6 mm | |||||||||
| Helix Angle | 35 º | |||||||||
| Precision Grade | JIS B 1704:1978 grade 1 | |||||||||
| Gear Teeth Type | Gleason | |||||||||
| Heat Treatment | Carburizing | |||||||||
| Bending Strength | 32.7 N·m3.33 kgf·m | |||||||||
| Backlash | 0.002-0.0043 in0.05-0.11 mm | |||||||||
| Material | SCM415 | |||||||||
| Tooth Hardness | HRC 55-60 | |||||||||
| Weight | 0.27 kg0.595 lb | 0.27 kg0.595 lb | 0.26 kg0.573 lb | 0.26 kg0.573 lb | 0.25 kg0.551 lb | |||||
|
|
||||||||||
